Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on an Opel Frontera?

Model: Vauxhall Frontera Frontera B, MK 2 - Years 1998-2003
Part: Fuel pump

To replace the fuel pump on an Opel Frontera, access the underside of the vehicle to loosen the bolts securing the tank in its housing. Once the bolts are removed, disconnect the hoses and connectors attached to the tank so it can be completely removed. The pump will be located at the top of the tank and must be extracted from its housing by unscrewing the bolts that secure it. Once the old pump is removed, install a new one and reattach the tank.

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to understand the fuse patterns of an Opel Frontera
Vauxhall Frontera (1998-2003 / Frontera B, MK 2) The fuse box located in the engine compartment of an Opel Frontera has fuses assigned to: horn, air conditioning system, air conditioning compressor,…
How to Reset the Trip Meter on the Opel Frontera?
How to Reset the Trip Meter on the Opel Frontera?
Vauxhall Frontera (1998-2003 / Frontera B, MK 2) The vehicle shown in this video is a 2001 Opel Frontera, and now we will see how to reset the trip meter. This operation is usually performed when yo…
How to Replace the Diesel Filter on the Opel Frontera
How to Replace the Diesel Filter on the Opel Frontera
Vauxhall Frontera (1998-2003 / Frontera B, MK 2) The diesel filter on the Opel Frontera is located at the bottom of the vehicle: to access it, you will need to remove the protective panel found at t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos