Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Side Indicator Bulb on an Opel Astra

Model: Vauxhall Astra Astra K - Years 2015-2022
Part: Side marker bulb

In this brief guide, we will provide instructions to remove and replace the side indicator bulb on an Opel Astra. First, move to the side of the vehicle and begin to pry on the side of the light unit, disconnecting the connector and the bulb found inside to remove it, as shown in the video. At this point, install the new indicator bulb with the new light unit, making the electrical connection; check its operation and replace the side indicator light on the other side in the same manner!

Posted on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front turn signal bulb of the Opel Astra
Replacement of the front turn signal bulb of the Opel Astra
Vauxhall Astra (1998-2006 / Astra G) Shortly we will see the instructions that will allow us to disassemble and replace the turn signal bulb of the front headlight of the Opel Astra. Fir…
How to replace the front indicator bulb of the Opel Astra J
How to replace the front indicator bulb of the Opel Astra J
Vauxhall Astra (2009-2016 / Astra J) Replacing the front bulb and the side turn signal bulb is a very simple operation, which can be done independently. The first step is to open the fro…
Replacing the Side Indicator Bulb
Replacing the Side Indicator Bulb
Vauxhall Astra (1998-2006 / Astra G) Replacing the side indicator bulb is very simple as you can remove the indicator itself from the wing without practically dismantling anything. Just …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos