Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter in an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Cabin air filter

See other generations:
Video tutorial

To replace the pollen filter in an Opel Corsa D, you need to access it from inside the cabin, on the passenger side. Get in the vehicle and locate the cover panel of the filter compartment under the glove box. Remove the lower protection by unscrewing the screws or unclipping the clips, then locate the cabin filter cover.

Unclip the cover and pull it out of its seat. Remove the used filter by pulling it outwards.

Insert the new filter, ensuring it is oriented according to the arrows printed on the edge, then close the cover and reattach the lower panel under the glove box.


Posted on 9 September 2026 by ScegliAuto


Related tutorials

How to Replace the Pollen Filter on an Opel Corsa
How to Replace the Pollen Filter on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Before starting, open the bonnet of your Opel Corsa. Begin by removing the cover located beneath the front wipers by unscrewing the relevant fixing s…
How to Remove and Replace the Pollen Filter on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) How to remove and replace the pollen filter on an Opel Corsa? Open the glove compartment and unscrew the perimeter screws; rotate the glove box forwa…
How to Replace the Pollen Filter on an Opel Corsa
How to Replace the Pollen Filter on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) How to replace the pollen filter fitted on an Opel Corsa? Here’s how to remove the filter from its dedicated housing: lift the front bonnet, use a sc…

    Frequently Asked Questions

    • Corsa 2006-2014 - Where is the cabin filter of the Opel Corsa 2008 located? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos