Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Pollen Filter on an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Cabin air filter

How to remove and replace the pollen filter on an Opel Corsa? Open the glove compartment and unscrew the perimeter screws; rotate the glove box forward (remove it from the dashboard), pull off the cover plate acting as a cap and slide out the air filter from its housing (as shown in the video). Once this is done, insert the new ventilation filter into the filter holder (be careful to insert the filter correctly without bending it). Finally, refit the box cap and all components of the glove compartment as they were disassembled earlier.

Updated on 7 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Pollen Filter on an Opel Corsa
How to Replace the Pollen Filter on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Before starting, open the bonnet of your Opel Corsa. Begin by removing the cover located beneath the front wipers by unscrewing the relevant fixing s…
How to Replace the Pollen Filter on an Opel Corsa
How to Replace the Pollen Filter on an Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) In this video tutorial, you will see how to replace the pollen filter on an Opel Corsa by following a few simple steps: first, purchase a new pollen …
Replacing the Pollen Filter on Opel Corsa E
Replacing the Pollen Filter on Opel Corsa E
Vauxhall Corsa (2014-2019 / Corsa E) To access the cabin air filter, or pollen filter, on the Opel Corsa E, first remove the glove compartment. Unscrew the four screws that secure it, tw…

Other guides you may be interested in

    Frequently Asked Questions

    • Corsa 2006-2014 - Where is the cabin filter of the Opel Corsa 2008 located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos