Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Vauxhall Corsa 1.2

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Spark plugs

This guide provides instructions for removing and replacing the spark plugs on a Vauxhall Corsa 1.2. First, open the bonnet and begin by removing the upper cover and the spark plug coils, unscrewing the two screws and disconnecting the side electrical connector. Then, use a 17mm socket spanner with an extension to unscrew and remove the four spark plugs, as demonstrated in the video. Now, install the new original spark plugs, hand-tightening them before gently tightening with the spanner; reconnect the coils and start the engine!

Posted on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the spark plugs of the 2017 Opel Corsa
How to replace the spark plugs of the 2017 Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Today we will explain how to replace the spark plugs on the 2017 Opel Corsa model E by yourself. To perform the spark plug replacement, we need to op…
Removing Spark Plugs on Opel Corsa
Removing Spark Plugs on Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) Are the spark plugs on your Opel Corsa due for a change? Here’s how to remove them. Lift the front bonnet and secure it. Remove the engine soundproof…
Replacing the Spark Plugs on the Opel Corsa
Replacing the Spark Plugs on the Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Today, you will learn how to remove and replace the engine spark plugs on the Opel Corsa in simple and quick steps. First, open the bonnet of your ca…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos