Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on an Opel Corsa?

Model: Vauxhall Corsa Corsa E - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Spark plugs

See other generations:
Video tutorial

To replace the spark plugs on an Opel Corsa, open the bonnet to access the engine bay and remove the plastic cover from the top of the engine. Next, use a screwdriver to disconnect the connector attached to the bracket holding the spark plugs.

By loosening the screws of the bracket, it can be removed: the four spark plugs on the bracket can then be replaced with new replacement parts. Once the replacement is complete, refit the bracket with the spark plugs and reconnect it to the appropriate connector.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Replace Spark Plugs on Opel Corsa
How to Replace Spark Plugs on Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) Are the spark plugs on your Opel Corsa damaged? Here’s how to remove them. Lift the front bonnet and secure it. Remove the engine soundproofing panel…
How to replace the spark plugs in the Opel Corsa E
How to replace the spark plugs in the Opel Corsa E
Vauxhall Corsa (2014-2019 / Corsa E) In this video, we will see how to replace the spark plugs of the Opel Corsa E: we start by disconnecting the negative pole of the battery (so we keep…
How to replace the spark plugs of the 2017 Opel Corsa
How to replace the spark plugs of the 2017 Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Today we will explain how to replace the spark plugs on the 2017 Opel Corsa model E by yourself. To perform the spark plug replacement, we need to op…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos