Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the spark plugs in the Opel Corsa E

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Spark plugs

In this video, we will see how to replace the spark plugs of the Opel Corsa E: we start by disconnecting the negative pole of the battery (so we keep the radio code at hand), then we remove the cover of the engine block, and disconnect the power supply of the coils by disconnecting the electrical connector. We remove the coil block and then unscrew and remove the spark plugs one by one, being careful not to drop them inside their compartment. When we put in the new ones, let's not forget to apply a thin layer of copper grease on the thread to make them more resistant. Tighten them well and then put the coils back in place by fixing the block, put the cover back in place and reconnect the negative pole of the battery. We can enter the radio code again.

Posted on 30 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the spark plugs of the 2017 Opel Corsa
How to replace the spark plugs of the 2017 Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Today we will explain how to replace the spark plugs on the 2017 Opel Corsa model E by yourself. To perform the spark plug replacement, we need to op…
How to Replace the Spark Plugs on an Opel Corsa
How to Replace the Spark Plugs on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you can start, open the bonnet of your Opel Corsa. Begin by removing the engine cover. This will give you the necessary space to work on the e…
Replacing Spark Plugs on Opel Corsa
Replacing Spark Plugs on Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) In this video, you will learn how to remove the spark plugs from the engine of an Opel Corsa. First, open the bonnet and remove the engine cover by u…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos