Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Spark Plug Replacement

Model: Vauxhall Corsa Corsa B - Years 1993-2000
Part: Spark plugs

It is advisable to carry out this maintenance operation with the engine cold to avoid unpleasant burns. Start by removing the leads from the spark plugs (the cables are long enough to allow identification of the lead corresponding to each cylinder) and then unscrew the spark plug itself. Insert the new spark plug by hand until it is fully seated, then tighten it with the appropriate spanner, but do not exceed the specified torque. Perform the same operation for all four cylinders and reposition the respective leads.

Updated on 5 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the spark plugs of the 2017 Opel Corsa
How to replace the spark plugs of the 2017 Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Today we will explain how to replace the spark plugs on the 2017 Opel Corsa model E by yourself. To perform the spark plug replacement, we need to op…
Instructions for Replacing Spark Plugs
Instructions for Replacing Spark Plugs
Vauxhall Corsa (1993-2000 / Corsa B) The efficiency of spark plugs in a petrol engine is absolutely crucial as they generate the combustion of the fuel that powers the engine. An inadequ…
How to replace the spark plugs on an Opel Corsa
How to replace the spark plugs on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before we can start, we will have to go and open the front hood of our Opel Corsa. So let's start by removing the top engine cover. By doing this we …

Other guides you may be interested in

How to Reset the Service Light on a Fiat 500

In this video, learn how to reset the oil maintenance service indicator on a Fiat 500. This is a very simple operation. Enter the vehicle and turn on the ignition. Press the accelerator pedal three times in quick succession, then release the pedal. Turn off the ignition and remove the key from the ignition lock. Reinsert the key and turn on the ignition, then wait for the indicator to illuminate. Finally, check the changes made to the car. Always remember to perform onboard computer modifications with the engine off.

Watch the video!


by ScegliAuto

More videos