Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cabin Filter on Opel Meriva

Model: Vauxhall Meriva Meriva B, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Cabin air filter

See other generations:
Video tutorial

Today, in this very simple video tutorial, you will see how to remove and replace the cabin filter on an Opel Meriva. The filter is located on the front passenger side: open the door and use plastic levers to detach the panels in the dashboard, as shown in the video.

Then, remove the plastic next to the centre console and take out the screws from the panel. Unscrew the four screws from the dashboard to remove it. Now, open the filter cover by releasing the clips and pull it out. Insert the new one in the correct orientation, indicated by printed arrows on the filter itself!


Updated on 27 March 2026 by ScegliAuto


Related tutorials

Where is the OBD2 Port on the Opel Meriva A?
Where is the OBD2 Port on the Opel Meriva A?
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Knowing the location of the OBD2 port on your Opel Meriva A is very important as it allows you to connect any compatible diagnostic tool to identify …
Where is the OBD port on a 2016 Opel Meriva?
Where is the OBD port on a 2016 Opel Meriva?
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) To easily locate the OBD port inside your second-generation Opel Meriva (2016), follow this guide. First, enter your Opel Meriva and use a flat screw…
Where is the fuse box located in the Opel Meriva A cabin?
Where is the fuse box located in the Opel Meriva A cabin?
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) If you want to find out where the fuse box of the cabin is located inside your Opel Meriva A, just carefully read the following guide and follow all …

    Frequently Asked Questions

    • Meriva 2003-2010 - Where is the pollen filter in the passenger compartment of an Opel Meriva located? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos