Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Dashboard Display Bulbs on Opel Corsa D

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Instrument panel light

In this video, learn how to remove and replace the display lights of the central dashboard on an Opel Corsa D. First, get inside the vehicle and use a plastic lever to remove the cover above the dashboard display; then, unscrew the fixing screw located underneath using a Torx screwdriver. At this point, remove the display or onboard computer and unscrew the side screws to access the electronic board and bulbs: simply pull them out and replace them with new ones, then reassemble everything!

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulbs on an Opel Corsa
How to Replace the Rear Light Bulbs on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Are the bulbs in the rear light of your Opel Corsa not working anymore? Let’s see how to replace the rear light bulbs. Open the boot; remove the insp…
How to Reset the "insp 2" Message on the Opel Corsa
How to Reset the "insp 2" Message on the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) To reset the "insp 2" message on the Opel Corsa, start by turning on the instrument panel and note that the "insp 2" message appears on the dashboard…
How to Replace the Instrument Cluster Bulbs on the Opel Corsa C
How to Replace the Instrument Cluster Bulbs on the Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) To replace the instrument cluster bulbs on the Opel Corsa C, first remove the plastic covers surrounding the steering column. Once these panels are r…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos