Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Zafira
    4. : How to remove the third stop on an Opel Zafira B.

Vauxhall Zafira - Video tutorial

Model: Vauxhall Zafira MK 2, Zafira B, A05 - Years 2005-2011
Part: Tail light
Operation: How to remove the third stop on an Opel Zafira B.

We see in this video the instructions that will allow us to remove the third stop on an Opel Zafira B, second series, by following these simple steps. First we open the boot lid and remove the plastic upright that we find behind the third stop, leveraging the sides; then we go to push from the holes in order to extract it from the outside, as shown in the video. At this point we disconnect the electrical connector to remove it definitively; we can replace the bulbs inside and then reassemble everything, applying the reverse procedure of disassembly!


Posted on 21 January 2024 by ScegliAuto



Where are the fuses and relays located in the Opel Zafira?
Vauxhall Zafira (2005-2011 / MK 2, Zafira B, A05) In this video we can see where the fuses and relays are located in the Opel Zafira, to check in case one or more devices suddenly stop working. As sh
How to mount the cylinder head on Opel Zafira
Vauxhall Zafira (2005-2011 / MK 2, Zafira B, A05) Do you want to reassemble the cylinder head of your car? Let's see in this video how to assemble the cylinder head on Opel Zafira: we have to insert
How to remove the door panel and lock of the Opel Zafira
Vauxhall Zafira (2005-2011 / MK 2, Zafira B, A05) Today we will see, in this short and simple guide, how to remove the front door panel and the lock of the Opel Zafira B. First we open the door and s

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos