Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting Roof Bars on Opel Zafira

Model: Vauxhall Zafira MK 2, A05, Zafira B - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Roof rack bars

See other generations:
Video tutorial

Do you want to fit roof bars on your Opel Zafira? Let's see how to install the roof rails if the car is not equipped. Remove the side handles of the headlining with a screwdriver, then remove the sun visors and the overhead lighting unit located in the panel.

Take off the covering panel, then check the holes under the car's roof sheet metal. Remove the car's roof bars and install the roof rails: there are securing screws to tighten in the holes.

At the end of the installation, all that remains is to fit the covering panel under the car's roof. Secure the bars to the roof rails after installing all the pieces.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Install Roof Bars on the Opel Zafira
How to Install Roof Bars on the Opel Zafira
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) Follow these steps to install roof bars or roof racks on the Opel Zafira, adhering to the instructions provided below. First, obtain a suitable roof …
How to Install Roof Bars on the Opel Zafira
How to Install Roof Bars on the Opel Zafira
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) To install the roof bars on the Opel Zafira, position the pieces so that they can be fitted into their respective supports, which are located both at…
Replacing the Radio in Opel Zafira B
Replacing the Radio in Opel Zafira B
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) In this video, you will see how to remove and replace the original radio in an Opel Zafira B, following the instructions below. First, get inside the…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos