Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on an Opel Corsa E (2014-2019)

Model: Vauxhall Corsa Corsa E - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Front bumper

See other generations:
Video tutorial

In this video, you will find instructions on how to remove the front bumper from an Opel Corsa E. First, open the bonnet of your car and unscrew the screws located at the top of the bumper using a Torx screwdriver; perform the same operation by unscrewing the screws found on both sides of the wheel arches and at the bottom of the bumper, as shown in the video.

At this point, gently unclip the bumper from the sides, then remove it completely; apply the reverse procedure for reassembly!


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of an Opel Corsa
How to Remove the Front Bumper of an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before starting, open the bonnet of your Opel Corsa and fully turn the front wheels to the right. Begin by unscrewing and removing all the screws tha…
Guide to Removing the Front Bumper of the Opel Corsa
Guide to Removing the Front Bumper of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Today's main instructions will illustrate how to remove and replace the front bumper of the Opel Corsa in simple steps. First, open the bonnet of the…
How to Remove the Front Bumper from an Opel Corsa
How to Remove the Front Bumper from an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) To remove the front bumper from an Opel Corsa, open the bonnet to access the screws located at the top of the bumper. Once all these screws have been…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos