Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. :
  5. Corsa
  6. : How to remove the air conditioning controls of an Opel Corsa

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Air conditioning controls
Operation: How to remove the air conditioning controls of an Opel Corsa

Before starting, we will have to go and sit in the driver's seat of our Opel Corsa. Let's start by inserting the tip of a small slotted screwdriver into the gap between the frame of the climate control controls and the controls themselves. After that, we will have to go pry, then remove the frame itself. By doing so, we will have freed the air conditioning controls of our Opel Corsa. We then proceed by going to disengage them and remove them from their housings. When we have completed this step, we will have successfully finished the disassembly.


Posted on 11 February 2024 by ScegliAuto



How to repair the air conditioning system of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) The repair of the air conditioning fan of the Opel Corsa depends on the nature of the problem. Here are some steps you could follow: Check the fuses:
Replacement of the climate control lights on the Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) In this video tutorial we will see how to remove and replace the air conditioning control bulbs on the Opel Corsa D, in simple and quick steps. First
Replacing the air conditioning fan resistor on the Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) In today's video tutorial we will see how to disassemble and replace the air conditioning fan resistor on the Opel Corsa C, following the instruction

Other guides that may interest you

    Frequently Asked Questions

    • Corsa 2006-2014 - What are the spies of the Opel Corsa? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos