Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Cabin Air Filter

Model: Vauxhall Agila Agila A - Years 2000-2007
Part: Cabin air filter

The cabin air filter purifies the air inside the vehicle and is located behind the passenger side glove compartment. Obtain a cabin air filter identical to the original, and to access it, you need to remove the two internal side clips from the glove compartment and unclip the door. The filter is located in the compartment behind the door. Once the filter cover is removed, take out the filter by pulling it out carefully to avoid dust dispersing. To collect any dirt, place a cloth at the bottom. Insert the new filter into the housing, ensuring it is positioned correctly, and close the cover accurately.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Rear light bulb replacement on Opel Agila
Rear light bulb replacement on Opel Agila
Vauxhall Agila (2008-2015 / Agila B) Let's see the replacement of the rear light bulbs on Opel Agila. Lift the hatch that closes the luggage compartment, unscrew the tightening screws on…
Replacing the External Temperature Sensor
Replacing the External Temperature Sensor
Vauxhall Agila (2000-2007 / Agila A) In the event of a failure of the external temperature sensor, its replacement requires the removal of the front grille. Remove the fixing screws of t…
Replacing the water pump on the Opel Agila
Replacing the water pump on the Opel Agila
Vauxhall Agila (2008-2015 / Agila B) If we want to replace the water pump on this car model, in the description below we will find the step by step instructions to correctly replace it. …

Other guides you may be interested in

How to Remove the Centre Console on a Renault Scenic

Watch this video to learn how to remove the glove compartment from the rear cover of the centre console on a Renault Scenic. Use a plastic lever to pry at the edge of the side plastics as shown in the video. Once the plastics are removed, unscrew the screws located at the sides of the centre console with a suitable screwdriver, and disconnect all the power connectors. Remove the side rests from the glove compartment. Fit the new piece onto the centre cover and proceed with the assembly of the remaining parts, working in reverse order.

Watch the video!


by ScegliAuto

More videos