Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Motor on the Opel Corsa C?

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Windshield wipers

To replace the wiper motor, first remove the wipers by loosening the bolts that secure them to the grille under the windscreen. Next, loosen the bolts located at both ends to also remove the grille itself. The wiper motor is located beneath this grille, in the central part. Disconnect it and pull it out of its housing for replacement. Once replaced, reattach the grille and wipers that were removed earlier.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Starter Motor on an Opel Corsa
How to Remove the Starter Motor on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Need to replace the starter motor on an Opel Corsa if damaged? Here’s how to remove it. Open and lift the front bonnet, disconnect the battery termin…
Removing the Starter Motor from an Opel Corsa
Removing the Starter Motor from an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Is the starter motor on the Opel Corsa faulty? Here’s how to remove it from the engine bay. Open and lift the front bonnet, disconnect the battery te…
Instructions for Removing the Starter Motor on Opel Corsa, 1300 MultiJet
Instructions for Removing the Starter Motor on Opel Corsa, 1300 MultiJet
Vauxhall Corsa (2000-2006 / Corsa C) In this video, you will see the main steps to remove the starter motor from an Opel Corsa, as well as from Fiat and Lancia models with the 1300 Multi…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos