Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Starter Motor on Opel Corsa, 1300 MultiJet

Model: Vauxhall Corsa Corsa C - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Starter motor

See other generations:
Video tutorial

In this video, you will see the main steps to remove the starter motor from an Opel Corsa, as well as from Fiat and Lancia models with the 1300 MultiJet engine. First, open the bonnet and remove the battery by disconnecting the terminals and removing any battery tray: remove the transmission sensor and then disconnect the two cables found above the starter motor.

To remove the starter motor, simply unscrew the securing bolts and then extract it. Reassemble everything by following the reverse procedure.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Driver's Airbag from Opel Corsa D Steering Wheel
Instructions for Removing the Driver's Airbag from Opel Corsa D Steering Wheel
Vauxhall Corsa (2006-2014 / Corsa D) If you need to disconnect the driver's airbag from the steering wheel, it is recommended first to disconnect the battery to avoid the activation of w…
How to Remove the Intake Manifold from the Opel Corsa 1.3 MultiJet?
How to Remove the Intake Manifold from the Opel Corsa 1.3 MultiJet?
Vauxhall Corsa (2006-2014 / Corsa D) To replace the intake manifold on the Opel Corsa 1.3 MultiJet, you must first remove some obstructing parts for easier access: the components to be r…
How to Replace the Timing Chain on the Opel Corsa D 1.3 MultiJet?
How to Replace the Timing Chain on the Opel Corsa D 1.3 MultiJet?
Vauxhall Corsa (2006-2014 / Corsa D) To replace the timing chain on the Opel Corsa D 1.3 MultiJet, open the bonnet to access the engine bay. At this point, it will be necessary to remove…

Other guides you may be interested in

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos