Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Intake Manifold from the Opel Corsa 1.3 MultiJet?

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Checks and maintenance

To replace the intake manifold on the Opel Corsa 1.3 MultiJet, you must first remove some obstructing parts for easier access: the components to be removed include the air filter housing and its duct, the oil vapour return pipe, the dipstick, and related sensors. After removing all the T45 torx screws, you will be able to disengage the intake manifold from its housing and replace it with a new spare part. After the replacement, reinstall all the previously removed parts.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Starter Motor on Opel Corsa, 1300 MultiJet
Instructions for Removing the Starter Motor on Opel Corsa, 1300 MultiJet
Vauxhall Corsa (2000-2006 / Corsa C) In this video, you will see the main steps to remove the starter motor from an Opel Corsa, as well as from Fiat and Lancia models with the 1300 Multi…
Replacing the Water Pump on the Opel Corsa 1.4i
Replacing the Water Pump on the Opel Corsa 1.4i
Vauxhall Corsa (2000-2006 / Corsa C) Follow these step-by-step instructions to remove and replace the water pump on the Opel Corsa 1.4i with a petrol engine. First, open the bonnet of th…
How to Replace the Timing Chain on the Opel Corsa D 1.3 MultiJet?
How to Replace the Timing Chain on the Opel Corsa D 1.3 MultiJet?
Vauxhall Corsa (2006-2014 / Corsa D) To replace the timing chain on the Opel Corsa D 1.3 MultiJet, open the bonnet to access the engine bay. At this point, it will be necessary to remove…

    Frequently Asked Questions

    • Corsa 1993-2000 - Where is the engine starter relay located in the Opel Corsa B? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos