Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Fan on the Opel Zafira C

Model: Vauxhall Zafira Zafira C, MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Blower motor

See other generations:
Video tutorial

In today's video, you will see the main steps to remove and replace the cabin fan on the Opel Zafira C, third generation. First, get inside the vehicle and start by removing the glove compartment by unscrewing all the screws; once removed, unscrew the screws of the air conditioning fan and then disconnect the power connector, as shown in the video.

At this point, remove the fan and replace it with the new one; then, simply reassemble everything by following the reverse procedure!


Updated on 27 April 2026 by ScegliAuto


Related tutorials

Instructions to Remove the Cabin Fan on Opel Zafira C
Instructions to Remove the Cabin Fan on Opel Zafira C
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) In this guide, we will see the instructions that will allow us to remove and replace the cabin fan on the Opel Zafira C, following these simple steps…
Instructions for Removing Radiator Fan from Opel Zafira
Instructions for Removing Radiator Fan from Opel Zafira
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) In this video, we will see the main instructions for removing the fan and radiator from an Opel Zafira B. First, open and lift the bonnet and disconn…
Where Are the Fuses Located on the Opel Zafira?
Where Are the Fuses Located on the Opel Zafira?
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) The Opel Zafira has three fuse boxes: these are located inside the cabin, in the engine compartment, and in the boot. The first is found under the da…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos