Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Glass of the Rear-View Mirror on an Opel Corsa D

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Side mirror

See other generations:
Video tutorial

In this video tutorial, you will see how to remove and replace the glass of the external rear-view mirror on an Opel Corsa D in simple steps. To remove the mirror glass, pry at the edges, possibly using a thin plastic lever, to disengage the glass from the rear clips, as shown in the video; finally, disconnect the electrical connector located at the back.

Replace it with a new one of the correct type, and secure it properly by connecting the electrical connector; finally, clean the glass and adjust it as best as possible!


Updated on 28 April 2026 by ScegliAuto


Related tutorials

Replacing the Wing Mirror on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Replacing the external wing mirror on an Opel Corsa. Use a plastic lever to pry between the perimeter of the mirror frame and the mirror glass. Pry u…
How to replace the glass of the external rearview mirror of the Opel Corsa
How to replace the glass of the external rearview mirror of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Replacing the glass of the external rearview mirror of the Opel Corsa model D is a really simple and quick operation to perform independently, also t…
How to replace the glass of the external rearview mirror of the Opel Corsa.
How to replace the glass of the external rearview mirror of the Opel Corsa.
Vauxhall Corsa (2006-2014 / Corsa D) This guide will show us how to disassemble and replace the glass of the external rearview mirror of the Opel Corsa, following the instructions below.…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos