Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the glass of the external rearview mirror of the Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Side mirror

Replacing the glass of the external rearview mirror of the Opel Corsa model D is a really simple and quick operation to perform independently, also thanks to our short video tutorial that will illustrate the steps we are now going to explain. To replace the mirror glass, it is necessary to place masking tape inside the plastic cover in order to prevent the cover from scratching during the removal of the glass. Using a plastic removal tool, we remove the glass, being careful not to damage the cables located on the back of it. After removing the connectors, we connect them to the new glass and mount it in the housing of the previous one by pushing it inward.

Posted on 23 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Wing Mirror on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Replacing the external wing mirror on an Opel Corsa. Use a plastic lever to pry between the perimeter of the mirror frame and the mirror glass. Pry u…
How to Replace the Mirror Glass on an Opel Corsa
How to Replace the Mirror Glass on an Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) This video tutorial shows how to replace the mirror glass on an Opel Corsa, following a few simple steps that will guide you towards proper vehicle m…
Replacing the Glass of the Rear-View Mirror on an Opel Corsa D
Replacing the Glass of the Rear-View Mirror on an Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) In this video tutorial, you will see how to remove and replace the glass of the external rear-view mirror on an Opel Corsa D in simple steps. To remo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos