Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter on an Opel Corsa E

Model: Vauxhall Corsa Corsa E - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Cabin air filter

See other generations:
Video tutorial

In this video tutorial, understand the steps to dismantle and replace the cabin air filter on the Opel Corsa E. First, access the front passenger side and locate the position of the cabin air filter, which is found low under the glove compartment; then remove the small plastic cover to access the filter box, extracting the old filter as shown in the video.

At this point, replace the air filter with the new one of the correct type, inserting it in the correct orientation (usually there are arrows printed on the filter).


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on an Opel Corsa B
How to Replace the Cabin Air Filter on an Opel Corsa B
Vauxhall Corsa (1993-2000 / Corsa B) Replacing the cabin air filter on your Opel Corsa B can be a bit complex for those not familiar with this type of task, but with the following guide,…
Replacing Cabin Air Filter on Opel Corsa
Replacing Cabin Air Filter on Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Replace the cabin air filter on the Opel Corsa. Open the front right door. Remove the securing plastics from the filter cover (under the dashboard an…
How to Remove the Cabin Air Filter from an Opel Corsa
How to Remove the Cabin Air Filter from an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you begin, sit in the front passenger seat of your Opel Corsa. Start by unscrewing and removing the screws that secure the lower cover of the …

Other guides you may be interested in

    Frequently Asked Questions

    • Corsa 2006-2014 - Where is the cabin filter of the Opel Corsa 2008 located? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos