Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Inspection Light on an Opel Zafira B

Model: Vauxhall Zafira Zafira B, A05, MK 2 - Years 2005-2011
Part: Service warning light

This guide shows how to reset the maintenance light on the Opel Zafira B, indicated by the "InSP" message. No specialist equipment is needed to perform the reset. With the instrument panel off, press and hold the brake pedal; then press and hold the reset button for the trip meter. While holding both controls, turn on the instrument panel and wait for the inspection light to flash. At the end of the operation, the mileage until the next inspection will be displayed. You can then release both controls and turn off the instrument panel. Turn the instrument panel back on to check that the operation has been completed correctly.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2013 Opel Zafira
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) This guide explains how to reset the inspection light on a 2013 Opel Zafira independently and without special tools. Press the brake pedal while turn…
How to Reset the Central Locking on the Opel Zafira
How to Reset the Central Locking on the Opel Zafira
Vauxhall Zafira (2005-2011 / Zafira B, A05, MK 2) Today's guide will show you the main steps to reset the central locking on the Opel Zafira. First, open the bonnet and begin by disconnecting both ba…
How to Replace the Front Headlamp Bulb on the Opel Zafira A
How to Replace the Front Headlamp Bulb on the Opel Zafira A
Vauxhall Zafira (1999-2005 / Zafira A, MK 1, T98) In this guide dedicated to your Opel Zafira A (1999-2005), discover the steps to correctly replace the front headlamp bulb independently. First, park…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos