Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the time in the Opel Zafira?

Model: Vauxhall Zafira Zafira A, MK 1, T98 - Years 1999-2005
Part: Clock

In this tutorial, see how to set the time in the Opel Zafira A, a very simple and quick operation to perform after a flat battery or when switching to and from daylight saving time. Start by inserting the key and turning on the instrument panel, then repeatedly press the indicated button until the time adjustment is activated. Once done, use the right button to change the values and the left button to switch to minute adjustment. Similarly, you can also adjust the date if necessary.

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time in the Opel Zafira?
How to Set the Time in the Opel Zafira?
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) .. In this tutorial, you will learn how to set the time in the Opel Zafira, a very simple and quick operation to perform, for example, after.. …
How to Set the Time on the Opel Zafira
How to Set the Time on the Opel Zafira
Vauxhall Zafira (2005-2011 / Zafira B, A05, MK 2) This guide shows you the steps to adjust the time on the Opel Zafira, following the instructions below. First, get inside the vehicle and turn on the…
How do you set the clock on the Opel Zafira?
How do you set the clock on the Opel Zafira?
Vauxhall Zafira (2005-2011 / Zafira B, A05, MK 2) In order to set the clock of the Opel Zafira, you need to turn on the instrument panel so that you can access the menu that will be displayed on the …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos