Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Corsa
    4. : Replacement of the petrol pump of the Opel Corsa

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Fuel pump
Operation: Replacement of the petrol pump of the Opel Corsa

Today we will see, in this video tutorial, how to disassemble and replace the fuel pump of the Opel Corsa, following these simple and quick steps. First we access the back of our car and we go to disassemble the sofa; after which we remove the cover to access the fuel pump, disconnecting the fuel inlet and outlet pipes, as shown in the video. At this point we disconnect the electrical connector of the fuel level sensor and unscrew the ring nut of the pump to remove it from the tank; let's replace it with the new one and reassemble everything!


Posted on 11 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Corsa 2000-2006 - What is the position of the fuel pump on the Opel Corsa C? Read Answer
    • Corsa 2000-2006 - Where is the fuel pump relay located in the Opel Corsa utility 1.4? Read Answer
    • Corsa 1993-2000 - Where is the fuel pump relay located on Opel Corsa? Read Answer
    • Corsa 2019-2026 - Location of the fuel pump on the Opel Corsa? Read Answer
    • Corsa 2006-2014 - Where is the fuel pump located in the Opel Corsa? Read Answer
    • Corsa 2006-2014 - How much does the Opel Corsa 1200 fuel pump cost? Read Answer
    • Corsa 2019-2026 - How much does the Opel Corsa 1.2 petrol pump cost? Read Answer
    • Corsa 2014-2019 - How much does the Opel Corsa petrol pump cost? Read Answer
    • Corsa 2000-2006 - How to replace the fuel pump in the Opel Corsa? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos