Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on an Opel Corsa

Model: Vauxhall Corsa Corsa B - Years 1993-2000
Part: Fuel pump

Before you can start, open the rear doors of your Opel Corsa. Begin by folding down the rear seat bench to remove the underlying cover. Next, unclip and remove the upper cover of the fuel pump. This will give you access to the fuel pump housing. Proceed to disconnect the relevant hoses, then unscrew and remove the retaining ring. At this point, you can extract and remove the fuel pump housing, disconnecting the hoses and electrical connectors from the fuel pump itself, and finally remove it from its housing, completing the disassembly. To install the new fuel pump and close everything up, simply follow these steps in reverse, and you will have completed the replacement.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on an Opel Corsa?
How to Replace the Fuel Pump on an Opel Corsa?
Vauxhall Corsa (2000-2006 / Corsa C) To replace the fuel pump on an Opel Corsa, you must completely remove the rear seat to access the components located underneath. Here, you will find …
How to Solve Starting Issues on an Opel Corsa 1.2 Petrol
How to Solve Starting Issues on an Opel Corsa 1.2 Petrol
Vauxhall Corsa (2006-2014 / Corsa D) Learn how to solve starting issues with an Opel Corsa 1.2 petrol that has problems starting and hesitating during acceleration. The issue was with th…
Replacing the Fuel Pump on the Opel Corsa B
Vauxhall Corsa (1993-2000 / Corsa B) In this video, discover how to remove and replace the fuel pump on the Opel Corsa B, second generation, in simple and quick steps. First, remove the …

Other guides you may be interested in

    Frequently Asked Questions

    • Corsa 1993-2000 - Where is the fuel pump relay located on Opel Corsa? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos