Do it yourself
Frequently asked questions about cars and motorcycles

How to Solve Starting Issues on an Opel Corsa 1.2 Petrol

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

Learn how to solve starting issues with an Opel Corsa 1.2 petrol that has problems starting and hesitating during acceleration. The issue was with the pressure regulator in the tank (on the fuel pump unit) with a deteriorated O-ring, which no longer ensured a proper seal; consequently, the pressure in the fuel system dissipated during stops, and upon starting, the pump had to recreate the pressure, causing delays or failure to start.

Replacing the O-ring (a part costing only a few pence) resolved the issue. You needed to relieve the pressure in the fuel system by removing the fuel pump relay and starting the engine until it stalled; ensure the fuel level in the tank was low. The fuel pump was located under the rear seat, which had to be removed to replace the O-ring.

Reassemble everything, and you're done.


Posted on 27 April 2026 by ScegliAuto


Related tutorials

Vauxhall Corsa (2000-2006 / Corsa C) The use of the fuse electrical diagram, which is valid for any vehicle, occurs when it is necessary to search for the cause of an electrical fault, o…
Vauxhall Corsa (2006-2014 / Corsa D) In today's video, you will see how to change the gear oil on an Opel Corsa D 1.2 Petrol. First, lift the vehicle, and remove the longitudinal bar fou…
Vauxhall Corsa (2006-2014 / Corsa D) In this video, we demonstrate how to time the timing chain on an Opel Astra 1.2/1.4 petrol, using the INA timing chain kit, which also includes the t…

Other guides you may be interested in

    Frequently Asked Questions

    • Corsa 1993-2000 - Where is the engine starter relay located in the Opel Corsa B? Read answer

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos