Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Dipped Beam on an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

Working with the engine off and the handbrake applied, lift the bonnet and secure it safely. To unscrew the screws that hold the back of the halogen bulb, it is best to use a socket spanner due to the awkward position of the screws.

Once done, you can remove the bulb, and while doing this, remember to disconnect its connector. Insert the new halogen bulb you have purchased that matches the original, screw in the fixing screws after reconnecting the connector.

Check that the bulb is functioning correctly. Goodbye!


Updated on 24 May 2026 by ScegliAuto


Related tutorials

Vauxhall Mokka (2012-2019 / Mokka A) Today, we will see in this video tutorial how to remove and replace the front headlamp bulbs on the Opel Mokka. First, open the bonnet of your car an…
Vauxhall Mokka (2012-2019 / Mokka A) If you are planning to replace the high beam bulb of your Opel Mokka first edition (year 2014), but you do not know how to perform the operation in q…
Vauxhall Mokka (2012-2019 / Mokka A) Today's instructions will show you how to remove and replace the headlight bulb of the Opel Mokka in simple steps. First, open the engine bonnet and …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to reset the tyre pressure light on the Toyota Yaris Hybrid?

To completely turn off the tyre pressure light on the Toyota Yaris Hybrid, inflate the tyres until they reach the recommended pressure value, which is indicated on the sticker affixed to the driver’s door pillar. Once inflated, insert the ignition key into the ignition barrel. The dashboard should be on, and you can press the SET button located at the bottom of the dashboard under the steering column, which will turn off the light.

Watch the video!


by ScegliAuto

More videos