Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Internal Handle on the Opel Corsa?

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Handle

Removing the internal handle of the Opel Corsa D is very simple. First, remove the door panel as you will be working inside it. To remove the panel, unscrew the screws located around the perimeter and inside the handle. Once done, disconnect the lock cable and, as shown in the video, unclip the handle spring using the tip of a screwdriver. At this point, separate the two parts and fit the replacement, ensuring the spring is positioned correctly.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the internal handle of the front door of the Opel Corsa
How to change the internal handle of the front door of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Below are the instructions that will allow us to disassemble and replace the inner handle of the front door of the Opel Corsa. First, we open the fro…
How to Remove the Front Door Handle on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) This guide explains how to remove the left front door handle on an Opel Corsa model D. To perform this operation, open the door and remove the side c…
How to replace the tweeters on the Opel Corsa B
How to replace the tweeters on the Opel Corsa B
Vauxhall Corsa (1993-2000 / Corsa B) In this video we can see how to replace the tweeters on the Opel Corsa version B: the tweeters are located near the internal door handle, on both sid…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos