Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp of an Opel Corsa?

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Headlight

In this video, see how to remove the front headlamp of an Opel Corsa D. This is a straightforward operation, although it requires removing several components. Start by removing the inner wheel arch liner using a Torx T20 key. Unscrew the screws underneath that secure the bumper, then unclip the bumper to gain working space. Unscrew the bolts of the upper grille plate using an 8mm spanner and completely remove the bumper. At this point, proceed to remove the headlamp by unscrewing the fixing bolts with the same 8mm spanner.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulbs on an Opel Corsa
How to Replace the Front Headlamp Bulbs on an Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Learn how to replace the front headlamp bulbs on an Opel Corsa. Release the front bonnet by pulling the lever located at the bottom right of the dash…
Replacing the Front Headlamp Bulb on the Opel Corsa
Replacing the Front Headlamp Bulb on the Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) In this tutorial video, you will see how to remove and replace the front headlamp bulb on the Opel Corsa, following the instructions below. First, op…
Removing the Front Headlamp Bulbs on an Opel Corsa
Removing the Front Headlamp Bulbs on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Are the car headlamp bulbs damaged? Let's look at removing the faulty bulbs from the headlamps of an Opel Corsa. Lift the front bonnet of the car and…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos