Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the cylinder head cover of the Opel Corsa D

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Cylinder head

Let's see in this guide how to disassemble and replace the head cover gasket of the Opel Corsa D, following the instructions below. First of all we open the bonnet and start by removing the screws that we find on the sides of the cylinder head cover, using a socket wrench; then we remove the tubes on the sides, as shown in the video. At this point we unscrew the central screws with a T30 torx wrench, in order to remove the injectors; then we remove the cylinder head cover, replacing the old gasket with the new one and reassembling everything!

Posted on 25 July 2022 by ScegliAuto

Video tutorial

Related tutorials

Removal of the tappets and cylinder head Opel Corsa 1.2 Petrol
Removal of the tappets and cylinder head Opel Corsa 1.2 Petrol
Vauxhall Corsa (2000-2006 / Corsa C) We see in this video the main instructions to be able to disassemble the tappets and the cylinder head of an Opel Corsa 1.2 Petrol. First we open the…
Head disassembly instructions on Opel Corsa C 1.0 (3 cylinders) 2003
Head disassembly instructions on Opel Corsa C 1.0 (3 cylinders) 2003
Vauxhall Corsa (2000-2006 / Corsa C) We see in this video the main instructions that will allow us to disassemble the cylinder head, and therefore to be able to replace the cylinder head…
Opel Corsa head gasket replacement guide
Opel Corsa head gasket replacement guide
Vauxhall Corsa (2006-2014 / Corsa D) We see in this guide the main instructions that will allow us to disassemble and replace the head gasket of the Opel Corsa. First of all, we open the…

How to Remove the Centre Console on a Renault Scenic

Watch this video to learn how to remove the glove compartment from the rear cover of the centre console on a Renault Scenic. Use a plastic lever to pry at the edge of the side plastics as shown in the video. Once the plastics are removed, unscrew the screws located at the sides of the centre console with a suitable screwdriver, and disconnect all the power connectors. Remove the side rests from the glove compartment. Fit the new piece onto the centre cover and proceed with the assembly of the remaining parts, working in reverse order.

Watch the video!


by ScegliAuto

More videos