Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Corsa
    4. : Opel Corsa head gasket replacement guide

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Engine head
Operation: Opel Corsa head gasket replacement guide

We see in this guide the main instructions that will allow us to disassemble and replace the head gasket of the Opel Corsa. First of all, we open the bonnet and start removing all the cables that we find at the top; we unscrew the screws of the cylinder head cover to remove it, then disassembling the engine support and the timing cover. At this point we remove the timing chain, then unscrewing the cylinder head screws to remove it; we then replace its gasket, installing the original one, following the video tutorial to the end!


Posted on 7 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Corsa 2014-2019 - How much does it cost to replace the cylinder head gasket in the Opel Corsa? Read Answer
    • Corsa 2014-2019 - How much does it cost to repair the cylinder head gasket on the Opel Corsa? Read Answer
    • Corsa 2006-2014 - How much does the cylinder head of the Opel Corsa D cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos