Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Rear Bumper on Opel Astra J

Model: Vauxhall Astra Astra J - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Rear bumper

See other generations:
Video tutorial

Before repainting a bumper, especially if it is an aftermarket replacement and not original, always perform a fitting test to ensure it fits perfectly. Check that the gaps along the closure lines are well aligned, precise, and uniform, without irregularities.

Attach the bumper to the side supports by fitting it into the respective slots, then secure it with screws around the perimeter. Also, position the rear lights to check the alignment of the edges, and if you notice any inaccuracies, mark them for possible adjustments.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

Removing the Rear Bumper from an Opel Astra
Removing the Rear Bumper from an Opel Astra
Vauxhall Astra (2004-2010 / Astra H) The following instructions will guide you on how to remove and replace the rear bumper of an Opel Astra in simple steps. First, open the rear tailgat…
How to Fit the Front Bumper on an Opel Astra K
How to Fit the Front Bumper on an Opel Astra K
Vauxhall Astra (2015-2022 / Astra K) How do you fit the front bumper yourself? Let's see how to install the bumper on the Opel Astra. Position the front bumper perfectly on the vehicle b…
How to Install the Front Bumper on an Opel Astra J
How to Install the Front Bumper on an Opel Astra J
Vauxhall Astra (2009-2016 / Astra J) Installing the front bumper on the third generation Opel Astra is quite simple, and the operation is easier if the vehicle is on a lift. Start by ope…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos