Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Electric Door Lock on the Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Door lock

See other generations:
Video tutorial

This guide provides instructions for dismantling and replacing the electric door lock on the rear door of the Opel Corsa, which also applies to the front door. First, open the door and start by removing the door panel, unscrewing all the screws; once removed, disconnect the internal lock cable as shown in the video.

Next, unscrew the side screws of the lock using a Torx screwdriver; remove the lock and replace it with the new one, applying the reverse procedure for reassembly!


Updated on 19 June 2026 by ScegliAuto


Related tutorials

Replacing the Lock on an Opel Corsa
Replacing the Lock on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Remove the door lock from an Opel Corsa C along with all associated parts. Open the door, remove the door trim panel, and take it off. Remove the adh…
How do you replace the door lock of the Opel Corsa C?
How do you replace the door lock of the Opel Corsa C?
Vauxhall Corsa (2000-2006 / Corsa C) Certainly, it is necessary to have good manual dexterity to carry out the disassembly and replacement of the lock installed in the door of the Opel C…
How to Change the Battery on Opel Corsa
How to Change the Battery on Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) What to do when the battery is dead? Here’s how to remove the battery from an Opel Corsa. Lift the car's bonnet and secure it. Remove the battery cov…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos