Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Tyre on an Opel Agila

Model: Vauxhall Agila Agila A - Years 2000-2007
Part: Tires

In this video tutorial, you can see how to replace a tyre on an Opel Agila, whether a tyre is punctured or simply to replace the brake pads. Position the car on a flat surface to ensure the jack is stable. Lift the boot and take out the jack; get into the vehicle, pull the handbrake, turn off the engine, and put it in first gear. Now, remove the wheel cover and loosen the 4 bolts holding the wheel; the next step is to lift the car with a hydraulic jack and place safety jack stands. Completely unscrew the wheel bolts and remove the wheel from its hub. At this point, you can fit the new tyre and tighten the bolts, then lower the car. Reposition the jack and other tools inside the boot.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light of an Opel Agila
How to Remove the Rear Light of an Opel Agila
Vauxhall Agila (2008-2015 / Agila B) Before you can start, exit the cabin of your Opel Agila and head to the rear of the vehicle. Begin by opening the boot. Next, unscrew and remove the …
Where to Find the OBD Port on an Opel Agila B
Where to Find the OBD Port on an Opel Agila B
Vauxhall Agila (2008-2015 / Agila B) If you are looking for the OBD port on your Opel Agila B but haven't found it yet, just follow these steps. First, get inside the vehicle and reach t…
How to Replace the Engine Air Filter on an Opel Agila B 2012
How to Replace the Engine Air Filter on an Opel Agila B 2012
Vauxhall Agila (2008-2015 / Agila B) To correctly and safely replace the engine air filter on your Opel Agila B (2012), follow the procedure described in this guide. First, park your Ope…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos