Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Opel Mokka

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part:

To reset the low tyre pressure warning light, follow these steps: First, check that the tyre pressures are within the recommended values for the vehicle (see the owner's manual). Then, access the driver's seat and turn on the ignition (do not start the engine). Locate the "menu" button on the multifunction lever to the left of the steering wheel, then rotate the dial to select the "tire learn" option. After that, press and hold the button at the end of the lever for three seconds. Immediately after, press and hold the same button again for three seconds; this will reset the warning light.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on an Opel Mokka?
How to Reset the Tyre Pressure Warning Light on an Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) To reset the tyre pressure warning light on an Opel Mokka, first inflate all tyres to the recommended pressure values, which are listed on the sticke…
How do you reset the tire pressure warning light on the Opel Mokka?
How do you reset the tire pressure warning light on the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) It will be possible to reset the tire pressure warning light of the Opel Mokka by inflating the tires to the appropriate pressure value: this value w…
How to Reset the Tyre Pressure Warning Light on the Opel Mokka?
How to Reset the Tyre Pressure Warning Light on the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) To reset the tyre pressure warning light on the Opel Mokka, open the driver's door and check the recommended inflation pressure values on the sticker…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos