Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the boot lid on an Opel Corsa?

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Car door

See other generations:
Video tutorial

In this tutorial, see how to replace the boot lid on an Opel Corsa, a straightforward and quick operation. First, open the boot, then detach the cover from the left pillar, disconnect the various wiring, and unclip the cover from the boot lid. Next, remove the fixing bolts from both hinges, take out the hydraulic struts, and fit them onto the replacement.

If necessary, transfer the third brake light and the various bulbs. To reassemble everything, simply follow the reverse procedure.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Boot Lock on the Opel Corsa
Guide to Replacing the Boot Lock on the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Today's instructions will show you how to remove and replace the boot lock on the Opel Corsa. First, open the boot lid and start unscrewing the two f…
What to do if the boot of the Opel Corsa won't open?
What to do if the boot of the Opel Corsa won't open?
Vauxhall Corsa (2006-2014 / Corsa D) In the Opel Corsa, the boot lid may become stuck, for example, due to a fault with the actuator or the control button. In these cases, it is still po…
Replacing the Third Brake Light on an Opel Corsa
Replacing the Third Brake Light on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) In these brief and simple steps, you will see the procedure for removing and replacing the bulbs of the third brake light on an Opel Corsa. First, op…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos