Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. :
  5. Meriva
  6. : How do you replace the cabin filter on the Opel Meriva?

Vauxhall Meriva - Video tutorial

Model: Vauxhall Meriva MK 1, Meriva A - Years 2003-2010
Part: Cabin air filter
Operation: How do you replace the cabin filter on the Opel Meriva?

Replacing the cabin filter on the Opel Meriva is done by opening the hood, so that you can access the components located immediately under the windshield. Here you will find the brushes that will have to be removed by unscrewing their fixing bolts; once the windscreen wipers have been removed, it will be necessary to unhook the clips that fix the grille, also removing the latter. In the area below, on the passenger side, it will be possible to find the cabin filter which must be removed from its housing and replaced with a new spare part. After the replacement, all the previously removed components can be fitted.


Posted on 9 April 2023 by ScegliAuto



How to replace the cabin pollen filter on Opel Meriva
Vauxhall Meriva (2003-2010 / MK 1, Meriva A) How to replace the cabin pollen filter on Opel Meriva? Let's see in this video how to perform the disassembly: we disassemble the front brush arms (w
How do you replace the cabin filter of the Opel Meriva?
Vauxhall Meriva (2003-2010 / MK 1, Meriva A) The replacement of the cabin filter of the Opel Meriva is done by opening the hood, so that access to the components located inside the engine compar
How to replace the cabin air filter on Opel Meriva B.
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) Today we will see how to remove and replace the cabin air filter on an Opel Meriva B, in simple steps. First of all, let's find the passenger compart

Other guides that may interest you

    Frequently Asked Questions

    • Meriva 2010-2017 - How do you replace the cabin filter on the Opel Meriva? Read Answer
    • Meriva 2003-2010 - Where is the pollen filter in the passenger compartment of an Opel Meriva located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos