Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the Service light on the Opel Insignia?

Model: Vauxhall Insigna Insigna A, MK 1 - Years 2008-2017
Part: Service warning light

To reset the Service light on the Opel Insignia, connect a diagnostic tool to the vehicle's OBD port. Once connected, select the car model and corresponding version on the scanner. Follow the instructions displayed in the tutorial to reset the light. After completing the operation, disconnect the scanner from the port located at the bottom left of the steering column. When you turn the ignition back on, you will notice that the light is off.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Insigna (2008-2017 / Insigna A, MK 1) The procedure to reset the Service light on an Opel Insignia involves turning on the instrument cluster so that you can navigate through the menu tha…
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) The procedure to reset the Service light that appears on the instrument panel of the Opel Insignia involves turning on the instrument panel by insert…
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) In order to reset the Service light that appears on the instrument panel of the Opel Insignia, you need to turn on the instrument panel by inserting …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos