Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front indicator bulb on an Opel Corsa?

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Headlight bulb

To replace the front indicator bulb on an Opel Corsa, open the bonnet to access the bolts securing the headlamp from the top. Once released from its housing, disconnect the connectors at the back and completely remove the headlamp. Now, remove the cover at the back and pull out the bulb inside, replacing it with a new one. After the replacement, reposition and secure the headlamp with the screws, reconnecting it to the relevant connectors.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Indicator Bulb on an Opel Corsa
How to Replace the Front Indicator Bulb on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you can begin, open the bonnet of your Opel Corsa. Start by turning the base of the blown bulb anti-clockwise to remove it from its housing. N…
Replacing the Indicator Bulb on the Opel Corsa
Replacing the Indicator Bulb on the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Below are the main steps to remove and replace the front indicator bulb on the Opel Corsa. First, open the bonnet by pulling the internal lever, and …
How to replace the front indicator bulb on an Opel Corsa?
How to replace the front indicator bulb on an Opel Corsa?
Vauxhall Corsa (2000-2006 / Corsa C) To replace the front indicator bulb on an Opel Corsa, open the bonnet and unscrew the internal bolts of the corresponding wheel arch. This will allow…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos