Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Poly-V Belt on the Opel Zafira T98

Model: Vauxhall Zafira Zafira A, MK 1, T98 - Years 1999-2005
Part: V-belt

This guide explains how to dismantle and potentially replace the poly-V trapezoidal belt for the Opel Zafira, model T98, first series. Note that the poly-V belt is a trapezoidal belt, not to be confused with the more traditional timing belt. The tools to be used are mentioned in the demonstration video. The procedure involves the following steps: 1. Lift the car; 2. Pull the pulley sideways; 3. Remove the belt; 4. Return the pulley to its initial position; 5. Replace the old component with the new part; 6. Position the new belt on the pulley starting from underneath the vehicle and aligning it with the internal teeth; 7. Reassemble everything by reversing the steps.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Zafira (1999-2005 / Zafira A, MK 1, T98) These short and simple steps will show us the process of disassembly and replacement of the serpentine belt or alternator of the Opel Zafira 2.0. Fir…
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) Here are the instructions for replacing the belt: first, lift the car and remove the plastic wheel arch liner on the front right and the lower engine…
Vauxhall Zafira (1999-2005 / Zafira A, MK 1, T98) To replace the timing belt on the Opel Zafira, open the bonnet to access the components inside the engine bay. On the left side of the engine block, …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos