Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Indicator Relay on the Opel Astra

Model: Vauxhall Astra Astra G - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Checks and maintenance

See other generations:
Video tutorial

If you notice that one of the indicators on your Opel Astra is not working, and after checking that the bulbs are functioning, you need to verify the operation of the relay that controls them. To do this, open the small glove compartment under the steering wheel on the left, and by applying pressure to the inner sides, detach it from its housing.

Use a flathead screwdriver to turn the screws on the frame by ninety degrees and remove it as well, allowing access to the plate where the fuses and some relays are located. The relays for the indicators are at the top right, coloured yellow; check their efficiency and replace it with a new one if necessary.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

Vauxhall Astra (2015-2022 / Astra K) Today we will show you how to reset the tyre pressure warning in just a few seconds on an Opel car (in our case, the Opel Astra). Turn on the instrum…
Vauxhall Astra (1998-2006 / Astra G) The fuses in the Opel Astra are located inside the fuse boxes present within the vehicle. In this car model, there are two boxes for this purpose, on…
Vauxhall Astra (2004-2010 / Astra H) Today's guide will show you how to remove and replace the indicator stalk or bulb switch on the Opel Astra. First, get into the vehicle and start by …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos