Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Air Filter

Model: Vauxhall Corsa Corsa B - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Cabin air filter

See other generations:
Video tutorial

First, you need to remove the wipers. Lift the cap, unscrew the nut; at this point, unscrew the screws shown in the video and now you can remove the plastic under the windscreen.

Remove the seal, take out the clips, unscrew the last bolt, and now remove the final cover. Release the two small clips holding the filter and pull it out. To fit the new filter, refer to the arrows drawn on the side, as shown in the video.

Check with light pressure that the filter is well seated at the bottom of the box, close the clips, refit the covers, the seal, and finally the wipers, and the job is done.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

How to Change the Air Filter on an Opel Corsa
How to Change the Air Filter on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) How do you change the air filter on an Opel Corsa? Open the front bonnet and see how to disassemble the parts. Locate the air filter on the left side…
Replacing Cabin Air Filter on Opel Corsa
Replacing Cabin Air Filter on Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Replace the cabin air filter on the Opel Corsa. Open the front right door. Remove the securing plastics from the filter cover (under the dashboard an…
How to Change the Cabin Air Filter in an Opel Corsa
How to Change the Cabin Air Filter in an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) To replace the cabin air filter in an Opel Corsa C, turn off the vehicle and open the bonnet. The pollen filter is located at the base of the windscr…

Other guides you may be interested in

    Frequently Asked Questions

    • Corsa 2006-2014 - Where is the cabin filter of the Opel Corsa 2008 located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos