Do it yourself
Frequently asked questions about cars and motorcycles

Ambient Light from the Doors of the Opel Astra J

Model: Vauxhall Astra Astra J - Years 2009-2016
Part: Checks and maintenance

Learn how to install LED lights in the doors of the Opel Astra J: using a plastic spatula (to avoid scratching the door), remove the door handle of the driver's side. Underneath, you will find three screws that need to be removed to take off the handle. Now you can remove the frame supporting the handle; consequently, the window control panel will also come off. Disconnect the electrical connector, identifying the connectors on the driver's side and the passenger's side, as highlighted in the video. In the connectors, you can insert the LEDs of your chosen colour, then simply reassemble all the door components and the light will shine through them, creating a very pleasant effect throughout the interior.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Astra (2009-2016 / Astra J) In this video we can see how to reset the service light on an Opel Astra version J: Like almost all cars, before resetting the service light, we must…
Vauxhall Astra (2015-2022 / Astra K) Below are the instructions that will allow you to manually lock the door locks on an Opel Astra in simple steps. First, unlock the door locks and get…
Vauxhall Astra (1998-2006 / Astra G) Is the battery in your Opel Astra key flat? Here’s how to change it from the remote. Take your remote and, using a screwdriver, separate the key from…

Other guides you may be interested in

    Frequently Asked Questions

    • Astra 2009-2016 - How to open the trunk of the Opel Astra that remained closed? Read answer
    • Astra 2009-2016 - How many km can the Opel Astra travel? Read answer
    • Astra 2004-2010 - Where is the power steering oil compartment on Opel Astra H? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos