Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Antenna from the Opel Zafira?

Model: Vauxhall Zafira MK 2, A05, Zafira B - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Antenna

See other generations:
Video tutorial

To remove the antenna from the Opel Zafira, open the rear tailgate and carefully pry at the back of the headlining to detach the trim. Once this piece is removed, you can access the cables connected to the antenna, which need to be disconnected.

Also, loosen the fixing screws to extract the antenna from its housing. At this point, you can install a new antenna by connecting it to the appropriate cables and securing it with the screws, then reattach the headlining.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

How to Change the Antenna on the Opel Zafira B
How to Change the Antenna on the Opel Zafira B
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) In today's video, see how to remove and replace the antenna, along with its base, on the Opel Zafira B, second series, in simple and quick steps. Fir…
How to install an Android radio on an Opel Zafira B
How to install an Android radio on an Opel Zafira B
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) Let's see how to replace the standard car radio of an Opel Zafira B with an Android radio. We start by removing the old radio, and to do so we need t…
Replacing the Radio in Opel Zafira B
Replacing the Radio in Opel Zafira B
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) In this video, you will see how to remove and replace the original radio in an Opel Zafira B, following the instructions below. First, get inside the…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos