Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Bulbs of the Opel Vivaro 2

Model: Vauxhall Vivaro MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

With the help of this short video tutorial, you will learn how to replace the rear light bulb of the Opel Vivaro 2, produced until 2019. The procedure is not complicated and can be carried out entirely in your garage. Start by turning off the vehicle and pulling the handbrake.

Open the van's boot and unscrew the three external fixing screws of the light using a Torx 30 key. Close the boot and remove the brake light to replace the bulb as shown in the video. Insert the new bulb and close the light unit, then reattach the screws.

To replace the headlight bulbs, unscrew the two Torx screws of the headlight with a number 27 key, then gently remove the headlight and change the bulb. Finally, close everything up.


Updated on 24 July 2026 by ScegliAuto


Related tutorials

Vauxhall Vivaro (2014-2019 / MK 2) In this tutorial, we can see how to replace the rear headlight bulbs in the Opel Vivaro van, a very simple and quick operation. First of all, make su…
Vauxhall Vivaro (2014-2019 / MK 2) To replace the dashboard bulbs on the Opel Vivaro, loosen the screws located under the climate control switches. Once these screws are removed and th…
Vauxhall Vivaro (2014-2019 / MK 2) In this tutorial we can see how to replace the front headlight bulbs in the Opel Vivaro van, an extremely simple and quick operation. First of all, m…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos