Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs in the Opel Vivaro van?

Model: Vauxhall Vivaro MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

In this tutorial, we can see how to replace the rear headlight bulbs in the Opel Vivaro van, a very simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then open the rear door, locate the three screws along the inner edge of the headlight in question and unscrew them using a Torx T30 key. Then grab the headlight, pull it outwards and separate it from the body.

At this point, all that remains is to remove the faulty bulb, replace it, and reassemble everything following the reverse procedure.


Posted on 11 November 2025 by ScegliAuto


Related tutorials

How do you replace the license plate light bulb of the Opel Vivaro?
How do you replace the license plate light bulb of the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) In order to replace the license plate light bulb of the Opel Vivaro, you need to pry with an object like a screwdriver to remove the transparent pane…
How to replace the front headlight bulbs in the Opel Vivaro van?
How to replace the front headlight bulbs in the Opel Vivaro van?
Vauxhall Vivaro (2014-2019 / MK 2) In this tutorial we can see how to replace the front headlight bulbs in the Opel Vivaro van, an extremely simple and quick operation. First of all, m…
How do you replace the timing belt of the Opel Vivaro?
How do you replace the timing belt of the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) In order to replace the timing belt of the Opel Vivaro, you need to lift the front right wheel, which must be removed from its seat in order to acces…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos