Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the front headlight of the Opel Vivaro?

Model: Vauxhall Vivaro MK 1 - Years 2001-2014
Part: Headlight

In order to remove the front headlight of the Opel Vivaro, you will need to open the hood so that you can loosen the screws of the front grille from the top: you will also need to loosen the screws inside the grille so that it can be removed. At this point, all the screws fixing the headlight to its seat will be visible so that the headlight can be removed from its seat: by doing this, it will be possible to disconnect the connector located inside and connect the new headlight to it, checking that everything works.

Posted on 6 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the rear headlight of the Opel Vivaro?
How do you remove the rear headlight of the Opel Vivaro?
Vauxhall Vivaro (2001-2014 / MK 1) In order to remove the rear light of the Opel Vivaro, you need to open the rear doors: once they are open, you can locate the screws next to the corr…
Where are the fuses located on the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) On the Opel Vivaro, all fuses are contained within two fuse boxes installed on the vehicle: these are located inside the cabin and in the engine comp…
How to Replace the Remote Battery on the Opel Vivaro?
How to Replace the Remote Battery on the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) To replace the remote battery on the Opel Vivaro, pry open the bottom of the device to detach the cover on the back of the remote. Once the cover is …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos