Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel from the Opel Meriva?

Model: Vauxhall Meriva Meriva A, MK 1 - Years 2003-2010
Part: Steering wheel

To remove the steering wheel from the Opel Meriva, first loosen the screws that secure the central airbag from its rear: the screws are located behind the horizontal spokes of the steering wheel. Once these screws are loosened, you can remove the airbag from the centre of the steering wheel and disconnect the connector located inside it. After the airbag has been completely removed, you can loosen the central nut that secures the steering wheel, completely detaching it from its column; finally, you can replace both the steering wheel and the airbag.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the steering angle sensor of the Opel Meriva?
How do you replace the steering angle sensor of the Opel Meriva?
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) In order to replace the steering angle sensor of the Opel Meriva, you need to loosen the screws located at the back of the steering wheel, so that th…
How to Remove the EPS from the Opel Meriva
How to Remove the EPS from the Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Follow this step-by-step guide on how to remove and replace the EPS from the Opel Meriva by following these simple steps. First, disconnect the batte…
How to Replace the Ignition Barrel on an Opel Meriva?
How to Replace the Ignition Barrel on an Opel Meriva?
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) To replace the ignition barrel on an Opel Meriva, loosen the bolts located at the back of the steering wheel to remove the front airbag. Once the air…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos