Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Corsa
    4. : How to disassemble the rear lights of the tailgate in the Opel Corsa?

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Tail light
Operation: How to disassemble the rear lights of the tailgate in the Opel Corsa?

In this tutorial, we can see how to disassemble the rear lights of the tailgate in the Opel Corsa E, an extremely simple and fast operation to be carried out in case we need to replace a bulb or the entire unit. First of all, make sure that the key is not inserted, then open the tailgate, locate the bolt on the side edge of it, and unscrew it with an 8mm socket wrench. Next, unlock the two fixing clips with a flat-tip screwdriver, grab the taillight, and separate it from the tailgate. At this point, we can disconnect the connector and replace the damaged unit.


Posted on 14 August 2023 by ScegliAuto



How to remove the rear lights of the Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) As we can see in this tutorial, removing the rear lights of the Opel Corsa D is an extremely simple and fast operation. First of all, make sure that
How to replace the bulbs of the rear fog lights in the Opel Corsa?
Vauxhall Corsa (2000-2006 / Corsa C) In this tutorial, we can see how to replace the bulbs of the rear fog lights in the Opel Corsa, which is a very simple operation. First of all, make
How to manually open the tailgate on the Opel Corsa?
Vauxhall Corsa (2014-2019 / Corsa E) In the Opel Corsa, it is possible for the tailgate to become blocked, for example due to a malfunction in the control button or the lock actuator. In

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos